View single post by Tom Nordin
 Posted: Wed Sep 13th, 2017 10:14 pm
PMQuoteReplyFull Topic
Tom Nordin

Joined: Wed Aug 9th, 2017
Location: Elk River, Minnesota USA
Tanks for your reply, Lane.

Yes, the bracket is dual spot welded to the cage - the arrow shows where the leakage came out.  My question is the pivot head that twists, and has the oscillator arm connected within.  I simply cannot find any way to pull that pivoting head off.  No visible fasteners at all . Maybe it was pressed on?

I've decided to strip it back down and then allow those parts to soak in cleaning solvent for a day or two in hopes that I can get all traces of oil/grease removed from inside of those pieces, then try again..