View single post by David Allen
 Posted: Sat May 18th, 2019 11:15 pm
PMQuoteReplyFull Topic
David Allen

 

Joined: Mon Mar 6th, 2017
Location: Northport, Alabama, USA
Status: 
Offline
Sorry about the confusion. The locating dowel is the round "bump" sticking up from the casting, just above the screw hole. There are two of them One on each side. The one on the right looks like it has a bit of metal "mashed down" on the right side of it.

I'm thinking that could be holding the box at an angle and binding the gears.