View single post by Michael Heffernan
 Posted: Thu Jul 25th, 2019 09:33 pm
PMQuoteReplyFull Topic
Michael Heffernan


Joined: Mon Oct 12th, 2009
To open the motor, place the edge of a box cutter blade at that groove in the case. tap it in and move it around. Then you should be able to put a small screw driver blade in there to finish the opening. Now, this will open the front, but these motors are wired from the rear and the front will give you no access to the head wire. For that you need to remove the core and that is another ball of wax.