AFCA Forums Home
AFCA Forums > Antique Fan Collectors Association > Buy-Sell-Trade > Nickel plate 1/25 HP Brushed Dumore Jewelers Lathe Motor FS

 Moderated by: Steve Cunningham, Stan Adams, Rod Rogers  
AuthorPost
Russ Huber
AFCA Member


Joined: Mon Nov 14th, 2005
Location: Southwest, Wisconsin USA
Status: 
Offline
Runs great, looks great, has a black knob motor reversing feature on the back. Facing the back of the motor if you turn it to the left it spins clockwise, turn it to the right CCW. Center the knob and the motor stops. The armature shaft is 1/4" and will take a brass GE 8" or 9" blades of past. $80.00 + shipping. You will need to attach a new power cord of your choice and plug. There is a decent condition cord leading off the motor 14" long I used to test it.























Last edited on Wed Nov 17th, 2021 06:52 pm by Russ Huber

Russ Huber
AFCA Member


Joined: Mon Nov 14th, 2005
Location: Southwest, Wisconsin USA
Status: 
Offline
The motor can be removed from the base, it is held in place with 2 screws.

Thomas Peters
AFCA Member
 

Joined: Mon Nov 16th, 2009
Location:  
Status: 
Offline
Like you state, this motor with pulley, was used with a lathe. Looks like the one in the ad.

Last edited on Mon Nov 15th, 2021 07:05 pm by Thomas Peters

Russ Huber
AFCA Member


Joined: Mon Nov 14th, 2005
Location: Southwest, Wisconsin USA
Status: 
Offline
Price reduced. It is a very nice example both from a mechanical and cosmetic standpoint. I put the motor up on a platform and put a 9" Whiz blade on it. It spun the blade just like downtown.  :D

Last edited on Thu Nov 18th, 2021 01:03 am by Russ Huber

Russ Huber
AFCA Member


Joined: Mon Nov 14th, 2005
Location: Southwest, Wisconsin USA
Status: 
Offline
A little imagination can go a long ways. The motor does not have the typical loud whining brush motor noise. The oil ports can be drilled and tap

 threaded for oil cups. The motor could be mounted upside down in a cabinet. Motor speed can be controlled with a rheostat.  :D






Beige Theme By: Di @ UltraBB
UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1222 seconds (56% database + 44% PHP). 26 queries executed.